120 Lt. Waste Container
120 Liters plastic waste container specifications: The
raw material used in the containers is resistant to sunlight, heat and cold.
Containers manufactured according to CE standards are certified according to ISO 9001: 2008 and ISO 9001: 14001 quality system.
Plastic waste containers are manufactured according to TS EN 840 norms.
Garbage Containers body lid material properties:
Made of high density polyethylene (HDPE).
Resistant to UV rays.
The light sensitivity of the paint used will be maximum and does not fade or change color in sunlight.
Wheel Material Specifications:
120 Lt. capacity of containers; Polypropylene wheels and tires are made of all weather resistant products.
The carrying capacity of the product is at least 60 Kg./pcs and it is 200mm in diameter and 30mm in width.
Wheel axle shaft is made of galvanized material.
Body and Wheel General Specifications:
120 Lt. capacity containers have 2 wheels and cover.
Containers are stainless, odorless, easy to clean, and not
affected by sunlight, alcohol, yeast, vinegar, acid, ammonia, etc. corrosive chemicals .
The containers are resistant to shock effects and there is no change in deformation measure and other properties of the shock effect.
Container bodies are resistant to sun and weather conditions.
Wheels on containers should be 200mm in diameter.
Castors 240 Lt. capacity of containers should be at least 60 kg.
The wall thickness of the containers is 3.4 mm (+/- 0.5 mm).
The containers are printed with silk screen printing or hot printing at the specifications and conditions required by the institution.
|Volume (L)||120 L|
|Width (mm)||450 mm|
|Length (mm)||570 mm|
|Height (mm)||970 mm|
|Wheel Diameter (mm)||200 mm|