TECHNICAL SPECIFICATIONS OF 4 AXLE LOWBED
RACK
- Low-Bed rack is welded by submerged welding machine from 20 mm x 150 mm (ST 52.3 A Quality) bottom and top and 10 mm ST 52.3 hub plate. It has “I” section and also has 4 pieces
- Rack is supported with 160-200 NPI axle beams that crosses rack
AXLE SHAFT
- 4 axle shafts with the 12-14-16 tons of capacity, are used
- With Air suspension, Stowage spring, Bogie suspension
- There are brake shoes and heavy brake levers suitable for TSE norms
SUSPENSION
- Parabolic double deck Z springs, Stowage springs, bogie suspension
ELEVATING FRONT AXLE SHAFT
- Remote operated elevating system for 1. and 4. axle shaft in cabin
TIRES AND RIMS
- 235/75 R 17.5
- 245/70 R 17.5
- 295/60 R 22.5
- 12 R 22.5
- 315/80 R 22.5 sizes 16+1 tires are used.
ELECTRICAL EQUIPMENT
- It is suitable for SAE standards and Tüv regulations
- Electricity is provided by 7 pin plug from vehicle
- There are necessary traffic advisory and stoplights on both sides
- There are backlights, brake lights, license plate lamps, trailer reflectors and orange warning lights on the sides
BRAKE EQUIPMENT
- 71/320/ewg ff brake system according to EC standards.
- Automatic slacks, 2 spring brake chambers and 2 service brake chambers.
- RSS that provides safe driving system against 4S / 2M ABS and rollover (Balance Control System).
- Air leaks in trailer are blocked by Sweden patented Ruffels union system
KING-PIN
- Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used
CONVEYOR LEGS
- On the front: 24 tons mechanical trailer legs
- On the behind: Manuel support legs
BACK ACCESS RAMP
- Back legs with Air-Hydraulic and with piston are manufactured from NPU with 160
FLOOR
- Diamond embossed plate and solid floor on tires and sides
PAINT
- Rack and superstructure are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint
COLOR
- It will be specified according to customer request
STANDARD ACCESSORIES
- 2 x 9 expanding brackets (300+300 mm)
§ 2 x 9 load binding ring
§ 1 x tool closet(under suspension beam)
§ 2 x Bike safety bar
§ 1 x Tire weld and holder
§ 1 x 60 lt capacity plastic water tank
OPTIONAL SPECIFICATIONS
- European axle shaft group and all kind of equipments
- Aluminum rims
- EBS brake system
- Double spare tire conveyor
- Fire extinguisher closet and fire extinguisher tube
- Tire mark according to request
- RAL color codes according to request