• Merbolin acrylic siding, grainy Paints & Coatings
  • Merbolin acrylic siding, grainy Paints & Coatings

Merbolin acrylic siding, grainy Paints & Coatings

  • Not Verified
  • Istanbul / Turkey
  • Established
View Company


Packaging shape

:25 kg. 


:Acrylic copolymer emulsion based, matt, grainy, exterior coating.


:30 color cards.

Usage places

:All kinds of plaster, gross concrete, ytong, brick etc. on the exterior of the buildings. It can be used safely for decorative and protective purposes in building materials.


:It is a water-based, grainy exterior coating that is excellent in adhesion to the surface to which it is applied, does not crack and spill, is resistant to abrasion, washing, alkali and water, has high covering power, does not fade in color. It is resistant to the negative effects of water, moisture, sun rays and salty moisture on the sea shores and makes the surface breathable. 

Technicial Specifications

:Binder Type: Acrylic copolymer
Viscosity (KU) (25 ° C): 135 - 140 (5% dilution with water)
Density (g / ml) (20 ° C): 1.80 ± 0.01
Solids (by weight) (%): 84 ± 2
Brightness (85 ° -Gloss): 7 ± 3
pH: 8.00 - 9.00
Coating Capacity (Theoretical): 2 m² / lt
Coating Capacity (Practical): 1 1.5 kg / m²
Recommended number of coats: Single coat
Drying Time (20 ° C): Drying: 1-2 hours Full Drying: 24 hours
Thinning Ratio: 5% 10 (with water - by volume)

Application 1

:Surfaces to be applied should be solid, dry and clean.

Dirty, dusty, swollen and old painted surfaces should be cleaned by scraping and surface defects should be corrected with Merbolin Exterior Putty. Merbolin Silicone Exterior Primer or Merbolin Merboizolan Insulation Primer should be applied to the surface in one coat. The product can be used as a primer by diluting with 50% water.

Application 2

:2 - 4 hours after primer application; Merbolin Acrylic Grainy Exterior Coating is applied as coarse pattern or thin layer with 5 - 10% (by volume) water.

Storage Conditions

:It can be stored for two years in its original packaging in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.

Important Notices

:The paint should be thoroughly mixed before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbocoat Elastic Exterior Coating is applied should be protected from physical and chemical factors for 3 days.
Paint should never be drained into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 22: Harmful if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.