• Merbolin advantage anticorrosion	Paints & Coatings
  • Merbolin advantage anticorrosion	Paints & Coatings

Merbolin advantage anticorrosion Paints & Coatings

  • Not Verified
  • Istanbul / Turkey
  • Established
View Company


Packaging shape

:0,300 lt, 0,600 lt, 2,500 lt, 7,500 lt and 15 lt



:It is an alkyd resin based, anticorrosive primer.


:White, gray, red and green

Usage places

:It can be used safely on all kinds of iron parts and steel construction surfaces against rust.


:It is a metal primer that is resistant to all weather conditions, has good adhesion and covering properties, forms a solid ground for synthetic paints to be applied on and has good rust prevention properties. 

Technicial Specifications

:Binder Type: Alkyd resin
Viscosity (KU) (25 ° C): 98 ± 2
Density (g / ml) (20 ° C): 1.66 ± 0.050
Solids (by weight) (%): 80 ± 2
Brightness (60 ° - Gloss): matte
Flash Point (° C): 38
Coating Capacity (Theoretical): 16 m ² / lt (30 µ dry film thickness)
Coating Capacity (Practical): 0,70 - 0,085 lt / m² (single layer) 0,115 - 0.145 kg / m² (in one coat)
Recommended number of coats: One or two coats
Drying Time (20 ° C): Dust Free Drying: 3- 5 hours Full Drying: 10 - 12 hours
Thinning Ratio: 5 - 10% (Merbolin Synthetic) With thinner)

Application 1

:Surfaces to be applied should be solid, dry and clean.
Rust and old swollen paint residues on the surface should be completely cleaned and sanded.

Application 2

:Merbolin Advantage Antirust; Thin with 5-10% Merbolin Synthetic Thinner in two layers; Wait for 2-3 hours between coats and apply with brush, roller or spray gun.

Storage Conditions

:It can be stored for three years in unopened original packages at 5-35 ° C in direct sunlight. Protect from excessive temperature and humidity.

Important Notices

:Antirust should be mixed well before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with Merbolin Synthetic Thinner.
Merbolin Advantage Anti-rust surfaces should be protected from physical and chemical factors for 12 hours.
Antirust must not be discharged into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 10: Flammable:
R 20/21/22: Harmful by inhalation, in contact with skin and if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7/9: Keep container tightly closed in a cool, well-ventilated place. :
S 16: Keep away from sources of ignition - No smoking. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label. :
S 51: Use only in well-ventilated areas. :