• Merbolin anticorrosion Paints & Coatings
  • Merbolin anticorrosion Paints & Coatings

Merbolin anticorrosion Paints & Coatings

  • Not Verified
  • Istanbul / Turkey
  • Established
View Company


Packaging shape

:0.375 liters, 0.750 liters, 2,500 liters, 7,500 liters and 15 liters 


:It is an alkyd resin based, anticorrosive primer.


:White, gray, red and green

Usage places

:It can be used safely on all kinds of iron parts and steel construction surfaces against rust.


:It is resistant to all weather conditions, has good adhesion and covering properties, provides a solid base for the synthetic paints to be applied on, it is a metal primer with superior rust prevention feature. 

Technicial Specifications

:Binder Type: Alkyd resin
Viscosity (KU) (25 ° C): 98 ± 2
Density (g / ml) (20 ° C): 1.48 ± 0.050
Solids (by weight) (%): 78 ± 2
Brightness (60 ° - Gloss): matte
Flash Point (° C): 38
Coating Capacity (Theoretical): 16 m ² / lt (30 µ dry film thickness)
Coating Capacity (Practical): 0,70 - 0,085 lt / m² (single layer) 0,100 - 0,125 kg / m² (in one coat)
Recommended number of coats: Two coats
Drying time (20 ° C): Dust free: 3- 5 hours Full drying: 10 - 12 hours
Thinning Ratio: 10 - 15% (with Merbolin Synthetic Thinner) )

Application 1

:Surfaces to be applied should be solid, dry and clean.
Rust and old swollen paint residues on the surface should be completely cleaned and sanded.

Application 2

:Merbolin Antirust; Dilute with 10-15% Merbolin Synthetic Thinner in two layers; Wait for 2-3 hours between coats and apply with brush, roller or spray gun.

Storage Conditions

:It can be stored for three years in unopened original packages at 5-35 ° C in direct sunlight. Protect from excessive temperature and humidity.

Important Notices

:Merbolin Antirust must be thoroughly mixed before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with Merbolin Synthetic Thinner.
Surfaces where Merbolin Antirust is applied should be protected from physical and chemical factors for 12 hours.
Antirust must not be discharged into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 10: Flammable:
R 20/21/22: Harmful by inhalation, in contact with skin and if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.:
S 16: Keep away from sources of ignition, cigarette:
S 51: Use only in well ventilated areas. :