• Merbolin exterior putty Paints & Coatings
  • Merbolin exterior putty Paints & Coatings

Merbolin exterior putty Paints & Coatings

  • Not Verified
  • Istanbul / Turkey
  • Established
View Company


Packaging shape

:4 kg and 25 kg. 


:Acrylic copolymer emulsion based, water based exterior putty.



Usage places

:Concrete, aerated concrete, plaster and so on. It can be safely used for smoothing surfaces, filling cracks and gaps.


:Water based, odorless, ready to use, easy to apply paste. It forms a solid ground for the paint to be applied on it and reduces paint consumption. It is resistant to water and moisture and has high inhalation ability. 

Technicial Specifications

:Binder Type: Acrylic copolymer
Viscosity (KU) (25 ° C):> 142
Density (g / ml) (20 ° C): 1.80 ± 0.05
Solids (by weight) (%): 77 ± 2
pH: 8.00 - 9.00
Coating Capacity (Practical): 0.5 1 lt / m² (depending on surface condition)
Recommended number of coats: 1-2 layers (depending on surface condition)
Drying Time (20 ° C): Drying: 3-5 hours Sanding: 8 - 10 hours
Thinning: No thinning. Ready to use.

Application 1

:Surfaces to be applied should be solid, dry and clean.

Rough and old painted surfaces should be cleaned by scraping. Merbolin Merboizolan Insulation Primer should be applied on absorbent and dusting surfaces.

Application 2

:After the surface preparation, Merbolin Exterior Putty is applied with a trowel or spatula in 1 or 2 coats, waiting for 3-5 hours between coats.

Storage Conditions

:It can be stored for two years in its original packaging in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.

Important Notices

:The paste must be thoroughly mixed before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbolin Exterior Putty is applied
should be protected from physical and chemical factors for 24 hours .
Paste must never be discharged into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 22: Harmful if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.