X
  • MERBOLIN Merbocoat elastic siding Paints & Coatings
  • MERBOLIN Merbocoat elastic siding Paints & Coatings

MERBOLIN Merbocoat elastic siding Paints & Coatings

MERBOLIN BOYA SAN.VE TIC.A.S.
  • Not Verified
  • Istanbul / Turkey
  • Established
View Company

Description

Packaging shape

:20 kg. 

Definition

:It is an acrylic resin based, elastic, matt exterior coating.

Color

:18 color cards.

Usage places

:All kinds of plaster, gross concrete, ytong, brick etc. on the exterior of the buildings. It can be used safely for decorative and protective purposes in building materials.
 

Features

:It is resistant to adverse weather conditions and ultraviolet rays on the sea shore, resistant to sea water and humidity-effective environments, can cover the defects of plaster on the floor thanks to the patterns provided during the application, is solvent-free, odorless, ipekmat appearance, elastic exterior coating. 

Technicial Specifications

:Binder Type: Acrylic copolymer
Viscosity (KU) (25 ° C): 130 - 140 (10% dilution with water)
Density (g / ml) (20 ° C): 1.34 ± 0.05
Solids (% by weight): 64 ± 2
Brightness (85 ° -Gloss): İpekmat
pH: 8.00 - 9.00
Coating Capacity (Theoretical): 1.5 m²lt
Coating Capacity (Practical): 0.08 - 1.2 kg / m²
Recommended number of coats: Single coat
Drying Time (20 ° C) : Drying: 3 - 4 hours Full Drying: 24 hours
Thinning Ratio: Applied without thinning.

Application 1

:Surfaces to be applied should be solid, dry and clean.

Dirty, dusty, swollen and old painted surfaces should be cleaned by scraping and surface defects should be corrected with Merbolin Exterior Putty. Merbolin Silicone Exterior Primer or Merbolin Merboizolan Insulation Primer should be applied to the surface in one coat.

Application 2

:2-4 hours after primer application; Merbocoat Elastic Exterior Coating is applied in one layer by roller without thinning.

Storage Conditions

:It can be stored for two years in its original packaging in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.

Important Notices

:The paint should be thoroughly mixed before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbocoat Elastic Exterior Coating is applied should be protected from physical and chemical factors for 3 days.
Paint should never be drained into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 22: Harmful if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.
ShippingDetail
PackagingDetail