• MERBOLIN Merbolin conversion lining Paints & Coatings
  • MERBOLIN Merbolin conversion lining Paints & Coatings

MERBOLIN Merbolin conversion lining Paints & Coatings

  • Not Verified
  • Istanbul / Turkey
  • Established
View Company


Packaging shape

:0.750 lt. 2.5 lt, 7.5 lt and 15 lt. 


:Acrylic copolymer emulsion based, white pigmented, interior primer paint.



Usage places

:It is a conversion primer used when water based satin paint is applied on the surfaces painted with solvent based satin paint.


:Water-based, odorless, high coverage because of pigment. It acts as a bridge between the topcoat and the surface; better adhesion of the paint to the surface. 

Technicial Specifications

:Binder Type: Acrylic copolymer
Viscosity (KU) (25 ° C): 90 ± 3
Density (g / ml) (20 ° C): 1.44 ± 0.03
Solids (by weight) (%): 57 ± 2
pH: 8.00 - 9.00
Coating Capacity (Theoretical): 12m² / lt 9 m² / kg (30µ dry film thickness)
Coating Capacity (Practical): 0.100 - 0.120 lt / m² (single coat) 0.140 - 0.170 kg / m² (single coat)
Recommended number of coats: Single coat
Drying Time (20 ° C): Drying: 12 hours Full drying: 24 hours
Thinning Ratio: 10 - 15% (with water)

Application 1

:Surfaces to be applied should be solid, dry and clean. Swollen parts are scraped, old solvent-based painted surfaces; Sand the teeth with a coarse toothed sandpaper and remove dirt and sanding dust from the surface.

Application 2

:Merbolin Conversion Primer is thinned with 10 - 15% water and applied to the surface in a single layer with a brush or roller. If two coats are required, allow 12 hours to dry between coats.

Storage Conditions

:It can be stored for two years in its original package in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.

Important Notices

:The primer must be thoroughly mixed before use.
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbolin Transformation Primer is applied should be protected from physical and chemical factors for 24 hours.
Primer should never be discharged into sewers and water channels.
Application should be done as stated above.

Hazard Warnings

:R 22: Harmful if swallowed. :

Safety Precautions

:S 2: Keep out of the reach of children. :
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.