Packaging shape | : | 0.750 lt, 2.5 lt, 7.5 lt and 15 lt. | ||
Definition | : | Acrylic copolymer binder based, transparent interior wall primer. | ||
Color | : | Transparent | ||
Usage places | : | It can be safely used as a paint primer on all kinds of plaster before water based interior paint applications, especially on surfaces where plasterboard and satin plaster have been applied. | ||
Features | : | It is harmless to the environment and odorless. Reduces surface absorbency and reduces topcoat paint consumption. It acts as a bridge between the surface and topcoat paint and provides more strong adhesion of the paint to the surface. | ||
Technicial Specifications | : | Binder Type: Acrylic copolymer Viscosity (D4 sec) (20 ° C): 11 ± 1 Density (g / ml) (20 ° C): 1.00 ± 0.02 Solids (by weight) (%): 11 ± 1 pH: 6.50 - 7.50 Coating Capacity (Theoretical): 25 m² / lt (single layer) (depending on surface porosity and absorbency) Coating Capacity (Practical): 0.03 - 0.05 lt / m² (single layer) 0.03 - 0.05 kg / m² (single layer) Recommendation Number of Coats : Single Coat Drying Time (20 ° C): Drying: 2 -3 hours Topcoat Application: After 6 hours Thinning Ratio: Dilute with 1/1 volume of water. | ||
Application 1 | : | Surfaces to be applied should be solid, dry and clean. Interior wall surfaces should be smoothed with Merbolin Interior Putty or satin plaster. The putty surfaces should be allowed to dry for 12 - 24 hours. Surface protrusions and roughness should be cleaned with sandpaper. Synthetic painted surfaces must be sanded. | ||
Application 2 | : | After the surface preparation is completed; Merbolin Transparent Interior Primer is diluted with water in 1/1 volume and applied to the surface with brush, roller or paint gun in one or two layers depending on surface porosity and absorbency. | ||
Storage Conditions | : | It can be stored for two years in its original package in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost. | ||
Important Notices | : | The primer must be thoroughly mixed before use. Ambient temperature should be between 5-35 ° C during application. After each application; Brush or roller should be cleaned with water. Surfaces where Merbolin Transparent Interior Primer is applied should be protected from physical and chemical factors for 24 hours. Primer should never be discharged into sewers and water channels. Application should be done as stated above. | ||
Hazard Warnings | : | R 22: Harmful if swallowed. : | ||
Safety Precautions | : | S 2: Keep out of the reach of children. : S 3/7: Keep container tightly closed in a cool place. : S 24/25: Avoid contact with eyes and skin. : S 29: Do not dispose of into drains. : S 46: If swallowed, seek medical advice immediately and show this container or label. |
