|:||It is a thermoplastic resin based, solvent based, flat and patterned, matt, elastic exterior coating.|
|:||5 sheets of color|
|:||All kinds of plaster on the facades of buildings, gross concrete, ytong, brick and so on. It can be used safely for decorative and protective purposes in building materials. It can be safely used on exterior surfaces of concrete, plaster, mineral substrate etc ... for decorative and protection purposeful.|
|:||It is resistant to all atmospheric conditions and has a long life. It is waterproof and allows the surface to breathe. It is resistant to sun rays, friction and washing and its colors do not fade.|
|:||Binder Type: Thermoplastic acrylic resin|
Viscosity (KU) (25 ° C): 105 - 110 (thinning with 5% Merbolite Thinner)
Density (g / ml) (20 ° C): 1.60 ± 0.05
Solids (by weight) (%) : 78 ± 2
Gloss (85 ° -Gloss): matte
Flash point: 46 ° C
Coating Capacity (Practical): 0.5 1 kg / m² 0.35 - 0.65 kg / m² (depending on the pattern)
Recommended number of coats: Two
Drying Time (20 ° C): Weaving drying: 2-3 hours Full drying: 24 hours
Thinning rate: 10% 15 (with water - by volume)
|:||Surfaces to be applied should be solid, dry and clean.|
Dirty, dusty, swollen and old painted surfaces should be cleaned by scraping and surface defects should be corrected with Merbolin Exterior Putty. Merbolite Exterior Paint should be thinned with 50% Merbolite Thinner and applied in one coat as primer.
|:||24 hours after primer application; Merbolite Exterior Paint; If thin pattern is desired, it is diluted with Merbolite Thinner at a rate of 10 - 15% and applied with a single layer roller.|
|:||It can be stored for two years in its original package in 5-35 ° C environments without direct sunlight. Protect from excessive temperature and humidity.|
|:||The paint should be thoroughly mixed before use.|
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbocoat Elastic Exterior Coating is applied should be protected from physical and chemical factors for 3 days.
Paint should never be drained into sewers and water channels.
Application should be done as stated above.
|:||R 10: Flammable:|
R 20/21/22: Harmful by inhalation, in contact with skin and if swallowed. :
S 2: Keep out of the reach of children. :