|:||0.750 lt. , 5 lt, 10 lt and 20 lt.|
|:||Acrylic copolymer binder based, interior wall primer.|
|:||Satin plaster or paste applied on the interior surfaces, water-based paint applied on the old surface; It can be safely used before topcoat applications.|
|:||Due to its high penetration properties, it completely prevents the absorbency of the gypsum surface, reduces the paint consumption and provides the integration of the paint with the surface. Ready to use; It can be used as a primer before any water based topcoat.|
|:||Binder Type: Acrylic copolymer|
Viscosity (D4 sec) (25 ° C): 10 ± 2
Density (g / ml) (20 ° C): 1.05 ± 0.03
Solids (by weight) (%): 9 ± 1
pH: 7.00 - 8.00
Coating Capacity (Theoretical): 15 m² / lt (single layer) (depending on surface porosity and absorbency)
Coating Capacity (Practical): 0.07 - 0.10 lt / m² (single layer) 0.07 - 0.10 kg / m² (single layer)
Recommend Number of
Coats : Single Coat Drying Time (20 ° C): Drying: 1-2 hours Topcoat Application: After 6 hours
Thinning Rate: Not Thinning
|:||Surfaces to be applied should be solid, dry and clean. Interior wall surfaces should be smoothed with Merbolin Interior Putty or satin plaster. The putty surfaces should be allowed to dry for 12 - 24 hours. Surface protrusions and roughness should be cleaned with sandpaper. Synthetic painted surfaces must be sanded.|
|:||After the surface preparation is completed; Merbolin Satin Plaster Primer is applied to the surface in one or two layers with a brush, roller or paint gun depending on the porosity and absorbency of the surface.|
|:||It can be stored for two years in its original package in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.|
|:||The primer must be thoroughly mixed before use.|
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
The surfaces where Merbolin Satin Plaster Primer is applied should be protected from physical and chemical factors for 24 hours.
Primer should never be discharged into sewers and water channels.
Application should be done as stated above.
|:||R 22: Harmful if swallowed. :|
|:||S 2: Keep out of the reach of children. :|
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.