|:||0.750 lt, 2.5 lt, 7.5 lt and 15 lt.|
|:||Acrylic copolymer binder based, silicone, matte, interior paint.|
|:||42 color cards.|
|:||It can be used safely for decorative and protective purposes on all kinds of interior surfaces such as gypsum, plaster, concrete and eternite.|
|:||Water-based, silicone added, removable, high closing and breathing ability, harmless to the environment, odorless, decorative, matte interior paint.|
|:||Binder Type: Acrylic copolymer|
Viscosity (KU) (25 ° C): 134 ± 3
Density (g / ml) (20 ° C): 1.48 ± 0.03
Solids (by weight) (%): 59 ± 2
Brightness (85 ° - Gloss): 7 ± 3
pH: 8.00 9.00
Coating Capacity (Theoretical): 13 m² / lt; 9 m² / kg (30µ dry film thickness)
Coating Capacity (Practical): 0.085 0.10 lt / m² (single coat) 0.125-0.150 kg / m² (single coat)
Recommended number of coats: Two layers
Drying Time (20 ° C) : Drying: 2-3 hours Full Drying: 24 hours
Thinning Ratio: 25-30% (with water - by volume)
|:||Surfaces to be applied must be solid, dry and clean. Dirty, dusty, swollen and old painted surfaces should be scraped off and primed with Merbolin Merboizolan Insulation Primer. Surface and ambient temperature should be between 5-35 ° C during application.|
|:||2 - 3 hours after primer application, Merbolin Silicone Modified Matt Interior Paint, which is applied with brush or roller, is thinned with 25 - 30% water. It should be applied as two coats, allowing 2 - 3 hours between the coats.|
|:||It can be stored for two years in its original packages in 5-35 ° C environments without direct sunlight. Protect from excessive temperature, humidity and frost.|
|:||The paint should be thoroughly mixed before use.|
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with water.
Surfaces where Merbolin Matte Silicone Interior Wall Paint is applied should be protected from physical and chemical factors for 3 days.
Paint should never be drained into sewers and water channels.
Application should be done as stated above.
|:||R 22: Harmful if swallowed. :|
|:||S 2: Keep out of the reach of children. :|
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label. Type Acrylic copolymer: