|:||0.250 liters, 0.375 liters, 0.750 liters, 2.500 liters, 3.750 liters, 7.5 liters and 15 liters.|
|:||Synthetic alkyd resin based, glossy, topcoat paint.|
|:||30 sheets of color|
|:||It can be safely used for decorative and protective purposes in iron constructions, interior and exterior surfaces of all kinds of wooden and metal building elements such as doors, windows, railings, marine vehicles and agricultural tools.|
|:||It is a glossy, high quality topcoat paint that has strong adhesion to the surface, high covering power, color fading, protects the surface to which it is applied, decorative appearance.|
|:||Binder Type: Alkyd resin|
Viscosity (KU) (25 ° C): 105 ± 5
Density (g / ml) (20 ° C): 1.20 ± 0.10
Solids (% by weight): 70 ± 2
Brightness (60 ° -) Gloss): Min. 85
Flash Point (° C): 38
Coating Capacity (Theoretical): 20 m ² / lt (30 µ dry film thickness)
Coating Capacity (Practical): 0,07 - 0,085 lt / m² (single layer) 0,085 - 0,100 kg / m² (in one coat)
Recommended number of coats: Two coats
Drying time (20 ° C): Touch drying: 4 - 5 hours Dust-free drying: 7 - 8 hours Full drying: 24 hours
Thinning Ratio: 10 15% (Merbolin Synthetic) With thinner)
|:||Surfaces to be applied should be solid, dry and clean.|
a) Old Wood Surface: Old and swollen paints are scraped, sanded, preferably primed with Merbolin Merbotex Wood Protector or Merbolin Synthetic Primer. b) New Wood Surface: Knots are burned, preferably primed with Merbolin Merbotex Wood Protector or Merbolin Synthetic Primer. c) Old Metal Surface: Old and swollen paints are scraped, sanded and primed with Merbolin Anti-Rust. d) New Metal Surface: The surface is free of dirt, dust and oil. Primed with Merbolin Antirust.
|:||12 hours after primer application; Merbolin Synthetic Dye;|
Thinning with 10 - 15% Merbolin Synthetic Thinner; It is applied to the surface in two coats by brush, roller or spray gun. Wait for 10 - 12 hours between coats.
|:||It can be stored for three years in unopened original packages at 5-35 ° C in direct sunlight. Protect from excessive temperature and humidity.|
|:||The paint should be thoroughly mixed before use.|
Ambient temperature should be between 5-35 ° C during application.
After each application; Brush or roller should be cleaned with Merbolin Synthetic Thinner.
Surfaces where Merbolin Synthetic Paint is applied should be protected from physical and chemical factors for 3 days.
Paint should never be drained into sewers and water channels.
Application should be done as stated above.
|:||R 10: Flammable:|
R 20/21/22: If inhaled, in contact with skin and if swallowed:
|:||S 2: Keep out of the reach of children. :|
S 3/7: Keep container tightly closed in a cool place. :
S 24/25: Avoid contact with eyes and skin. :
S 29: Do not dispose of into drains. :
S 46: If swallowed, seek medical advice immediately and show this container or label.