2000 Lt, 3000 Lt
AISI 304 quality stainless steel
1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
1 st wall body 1,5 mm
Isolated body 1 mm
Cooler unit and tank body are mounted on single chassis.
There are 1, 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
Isolation range has 55 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
Product output has DN50 male sleeve, butterfly valve.
There is also spring cover.
There is Ø 200 mm covered product entry on the cover.
There is manual measuring scale with ‰ 3-4 sensitivity rate.
There are adjustable bolted stands under the tank.
Design that allow zero liquid to remain in the rank during discharge.
Welded sections are welded with 1 st class Argon TIG welding and has 1 st class smooth polishing.
Fast Cooling without crystallization within minimum milk volume
Minimum gas charging
Cooling with R404 A gas
Peymak Milk Cooling Tanks provide each milking to cool from 35 °C to 4 °C at ambient temperature (32 °C - 38 °C)
There are solenoid valve, dilatation valve,dryer, vision glass, liquid holder and valves of compressor.
Direct Expansion System
TSE 13732/CE/EAC regulation of Compliance certificate
Test of Compliance Certificate
Optionally, design Suitable for 2, 4 and 6 milking time
Protection grade IP 65 Electric control panel
Tanks operate at 380 Volt energy.
Digital thermometer heat level indicator
Electronic control card that is specially designed and is able to control the milk temperature and operation of the tank, easy utilization
Phase protection relay
System disables automatically when the cover of the tank is opened.
Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break)
Emergency cooling switch, digital level indicator
Min. Milk Level
6,3 KW/7 HP
Ø 450x2 Adet
0,25 Kwx2 Adet
2 B II
7,75 KW/8 HP
Ø 500x2 Adet
0,35 Kwx2 Adet
2 B II