Promast Adwood is a polyurethane based, water-proof liquid wood adhesive with very strong bonding capabilities.
Product Code: PMA180
Gross Weight: 750gr
Shelf Life: 12 months
Color: Amber
"Excellent adhesion to wood, metal, concrete and several plastics.
Suitable for indoor and outdoor applications.
Gap filling the property with limited expansion.
Extremely resistant to water, moisture and weather conditions.
Meets D4 criteria (according to DIN EN 204 standard)
Paintable
Solvent-free / Transparent (amber color)
Adhering almost all types of wood surfaces with each other; metals; some type of plastics, stones, bricks, and concrete.
Adhering wood construction materials and their repairs.
Manufacturing furniture and their repairs.
Yacht and boat construction industry.
Viscosity (20°C): 6.000 – 8.000 cps
Density: 1,10 gr/ml
Open time (20°C): 40 minutes
Pressing Period (20°C): 4 hours
Solid Content Ratio: 95%
Service Temperature: Between -15°C and +100°C
Application Temperature: Between +10°C and +30°C
Color: Honey Color
Applications performed below 5°C will not yield high enough performance in adhering.
Adhered surfaces should be clean and free from grease and dust.
Especially when adhering surfaces which do not contain or do not emit humidity, the surfaces are recommended to be dampened approximately 5% water compared to the amount of adhesive used.
The adhesive should be applied as a thin layer only to one of the surfaces which will be adhered.
Surfaces should be put together and pressed before the open time of the product expires.
It may take almost a day for the adhesive to fully dry out, during which time the parts should be carried around carefully.
Newly applied adhesive can be cleaned either by Promast Foam Cleanser.
It does not adhere plastics such as PE, PP, nylon and Teflon
For a strong adhesion, at least one of the surfaces should be porous.
The package is filled under nitrogen, after the application make sure there is no air left inside by turning it upside.
It contains diphenylmethane -4, 4 diisocyanate. If inhaled for long periods, it may cause sensitivity on respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives does not carry risks to human health or to the environment.
