Promast Adwood XP is a fast-curing, water-proof polyurethane wood adhesive with short open-time.
Product Code: PMA 182
Gross Weight: 750gr
Shelf Life: 6 months
Color: Amber
Shorter open and clamping time.
Meets D4 specs according to DIN EN 204.
High water and moisture resistance.
Fast curing.
Easy to apply.
Can be sandpapered or trimmed after 2 hours.
Limited expansion.
• Stong adherence for wood to wood and wood to
other materials applications.
Adhering almost all types of wood surfaces with each other; metals; some type of plastics, stones, bricks and concrete.
Adhering wood construction materials and their repairs.
Manufacturing furniture and their repairs.
Yacht and boat construction industry.
Viscosity (20°C): 2.000 – 4.000 cps
Density: 1,10 gr/ml
Open time (20°C): 15 minutes
Pressing Period (20°C): 2 hours
Solid Content Ratio: 100%
Service Temperature: Between -15°C and +100°C
Application Temperature: Between +10°C and +30°C
Color: Honey Color
Applications performed below 5°C will not yield high enough performance in adhering.
Adhered surfaces should be clean and free from grease and dust.
Especially when adhering surfaces which do not contain or do not emit humidity, the surfaces are recommended to be dampened approximately 5% water compared to the amount of adhesive used.
The pressing of the surfaces should be completed before the open time of the product expires.
It may take almost a day for the adhesive to fully dry out, during which time the parts should be carried around carefully.
Newly applied adhesive can be cleaned either by Promast Foam Cleanser.
It does not adhere plastics such as PE, PP, nylon and Teflon
For a strong adhesion, at least one of the surfaces should be porous.
The package is filled under nitrogen, after the application make sure there is no air left inside by turning it upside.
It contains diphenylmethane -4, 4 diisocyanate. If inhaled for long periods, it may cause sensitivity on respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives does not carry risks to human health or to the environment.
