TECHNICAL SPECIFICATIONS OF ROCK TYPE TIPPER
SUPERSTRUCTURE
- Front side is oblique (space) type in 7.500 mm-9.500 mm sizes. It is 2420 mm wide inside and 2550 mm wide outside.
- Sidewall plates are closed by “U” shape. Damper centre member is composed by closing 2, 200 NPUs by welding their nozzles.
- Adjustable springs on back cover are connected on the upper side, they can be opened and closed from bottom
HYDRAULIC
- Damper movement is provided by level 5 heavy telescopic cylinder which provides 45o tilt angle .(LIFT COLD DRAW SEAMLESS PIPE )
- Oil reservoir has suction filter, damper pneumatic remote, two speed elevating valve and a limit control security.
- Gas tank must be added to trailer, hydraulic contact between trailer and conveyor, is provided by 2 sockets
RACK
- Strengthened “I” section centre members are welded by submerged welding machine. They are welded between 120/12 mm bottom or top flat steel and 5 mm hub plate
- These racks are supported against being twisted by binding them with axle beams
AXLE SHAFT
- 3 axle shafts with the capacity of 12 tons, are used
- There are brake shoes and heavy brake levers suitable for TSE norms
SUSPENSION
- Automatic boot unloading process (UNLOADING LEVEL)
- Parabolic double deck Z springs and dashpots
ELEVATING FRONT AXLE SHAFT
- Remote operated elevating system for front axle shaft in cabin
TIRES AND RIMS
- 385/65 R22,5 tires 6+1
- 11,75 x 22,5 rims 6+1
ELECTRICAL EQUIPMENT
- It is suitable for SAE standards and Tüv regulations
- Electricity is provided by 7 pin plug from vehicle
- There are necessary traffic advisory and stoplights on both sides
- There are back lights, brake lights, license plate lamps, trailer reflectors and orange warning lights on the sides
BRAKE EQUIPMENT
- 71/320/ewg ff brake system according to EC standards.
- Automatic slacks, 4 spring brake chambers and 2 service brake chambers.
- RSS that provides safe driving system against 2S / 2M EBS and rollover (Balance Control System).
- Air leaks in trailer are blocked by Sweden patented Ruffels union system
KING-PIN
- Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used
LEGS
- Two speed, telescopic, mechanical conveyor legs, with the capacity of 24 tons
PAINT
- Rack and superstructure are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint
COLOR
- It will be specified according to customer request
STANDARD ACCESSORIES
- Multi-piece plastic fenders that covers trailing axle tires
- 1 plastic tool box
- Control Panel(Mob, air clock, access ramp lever)
- Plastic water tank
- Roller spare tire conveyor
- Aluminum bike impact absorber
- Mounting and mounting space
OPTIONAL SPECIFICATIONS
- European axle shaft group and all kind of equipments
- Import plates(Domex-Hardox)
- Aluminum rims
- Double spare tire conveyor
- Axle shaft elevator addition
- Hydraulic end cover
- Second lift
- Lift tampon
- Fire extinguisher closet and fire extinguisher tube
- Tire mark according to request
- RAL color codes according to request