One phone call; is the only device to control two different telephone lines. With this device; depending on a single phone line; You can now use the fax / answering machine / computer modem connection in two lines. You can manually select the lines you want to work with the key on the device; you can have the device automatically answer both phone lines on external calls.
The device measures 75x60x32mm.
BENEFITS;
- Control two lines at the same time.
- He understands which call he comes from, and connects to him automatically.
- LEDs on; indicates which line is used.
- your fax; two lines automatically.
- Your answering machine; You can use it automatically in two lines.
- Simple to install and easy to use
INSTALLATION;
- HAT1: Connect your 1st telephone line
- HAT2: Connect your 2nd telephone line.
- TLF: Telephone / Fax / Telephone / Telephone with the answering machine.
- DC 7.5V: Insert the supplied adapter jack. Insert the adapter end into the mains power supply (220V / 50Hz)
AUTOMATIC USE;
When the switch is in the "AUTO" position; The green LED lights continuously and indicates that the device is in automatic mode. It allows you to connect to that line even if you receive a call from that line. The leds also tell you which is connected to the line. When the call comes in, the auto led starts to flicker for about 3 minutes. In this case, when you receive a call from the other line, call or fax. If there is a call from the other line during the call, it will notify you of the call by burning the led of the related line. In this case, move the switch to the appropriate position to contact the incoming call. At the end of the waiting period, the green LED continues to illuminate continuously and informs you that it is switched to automatic mode.
MANUAL USAGE
Switch the device switch to Hat1 or Hat2; it can be ensured to operate from that location continuously. In this case, when the call is received from the other line, the call will notify you of the incoming call by blinking the led of the incoming line. The switch is set to the corresponding line position for an incoming call.
