SURFACES TO BE APPLIED
All old painted surfaces, which have been prepared for the ground, can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textiles and wall paper.

TECHNICAL SPECIFICATIONS
Density: 1,25 ± 0,02 (gr / cm³)

APPLICATION
Application surfaces should be smooth, firm, moisture-free and self-supporting surfaces. If possible, the coatings on the old painted, glass textured and wallpapered surfaces should be removed and a smooth and smooth surface should be obtained with Bianca Interior Putty . After sanding the putty surface, Bianca Vals Satin Primer should be  applied and surface preparation should be completed. Satin plaster should not be used for the preparation of the ground due to its weak and dusting character.
Bianca Artistico LineaIt can be applied horizontally, vertically or diagonally with the help of decorative brush without thinning. With a clean and thick brush close to drying, the liquid part on the sands is removed by pressing the brush slightly. Thus, the sands look matt and the subfloor gets a bright appearance.
The tools used after the application should be cleaned with water immediately.
The paint should be mixed until completely homogeneous before use.
Do not apply below + 5ºC.
Before application on very bright and glassy surfaces, the surface should be sanded to form a solid surface for better adhesion.