BILIZO EPOXY M-PRIMER
Multi-Purpose Transparent Epoxy Primer

Product Definition

It is an epoxy resin-based, two-component, solvent-free, low viscosity, transparent primer.

• As primer layer before application of epoxy or polyurethane top-coats on the concrete, cement or epoxy mortars for floors subject to medium to heavy load,
• As concrete primer to wet the concrete surface and provide a good adhesion bridge before top-coats of epoxy mortar, epoxy self-leveling screed, epoxy laminate or epoxy/polyurethane,
• As binder for preparation of level stabilization, repair and improvement mortar,
• As binder for preparation of epoxy mortar to obtain a thickness of 5 to 8 mm,
• For repair of big cracks and form of chamfering by mixing with silica sand or different fills.

As an impregnation primer: 150 to 200 gr/m2 (Depending on the concrete surface, it is recommended to thin it with Epoxy Thinner by 5-10 % for better impregnation)

Level stabilization mortar:
BILIZO® EPOXY M-PRIMER  :..................................500 gr/m2

6.0 to 7.0 mm Epoxy Mortar:
BILIZO® EPOXY M-PRIMER  : ................................1,5 kg/m2
0,1 - 0,6 mm quartz sand.......................................4,8 kg/m2
0,6 - 2,0 mm quartz sand........................................7,2 kg/m2

Low-viscosity,
High wetting capability,
Quickly cured.

A 13.5-kg set of BILIZO® EPOXY M-PRIMER consists of Component A in one pail of net 10 kg and Component B in one galloon of net 3.5 kg.