Considering the animal welfare and health, the Chain Fertilizer Scraper is user-friendly and resistant to corrosion, oxidation and tough external conditions. It has been developed as a system with high energy efficiency.
Why LAKTO Chained Fertilizer Scraper?
LAKTO Chain Fertilizer The scraper can be used for years to increase the level of hygiene in the stables, to minimize the diseases and thus to increase milk yield, while it can be used for years thanks to its durable structure. In addition, the system allows the user to adjust the work order with the interface it provides. It has 25 different cleaning program options such as day / night, summer winter, self-timer. At the same time, users can enter their own stripping programs into the system.
Where and How to Use
There is a sensor that continuously monitors the motor load on the drive circuit. In the case of an animal in the fertilizer path, the sensor can detect it and load it into the animal for a user-adjustable time. If the animal does not rise, it returns to its first position and waits for the next stripping time. Thus, animal injuries and animals are prevented from damaging each other by fear of the scraper. The lower fins of the scraper are designed so that the concrete paths of the animals are eroded and do not cause them to become slippery. Thanks to its silent operation, it does not cause any negative effects on the eating behavior of animals.
1 set LAKTO scraper can strip 2 separate fertilizer corridors with equal length parallel to each other. Fertilizer channels with widths between 200-500 cm can be peeled off. In a set scraper, there are 2 scrapers, corner pulleys, drive and chain tensioner, stable lengthened caliber marine chain length and programmable control unit with PLC.
The control unit can be programmed to 25 separate stripping hours. System power resistance is controlled, when faced with an animal lying in the corridor, the system determines this and stops to prevent any damage to the animal. This prevents animals from being harmed and harmed by each other as they are hurt or burned.
The drive unit is equipped with one of 0.37, 0.55, 0.75 or 1.1 kW, 3 × 400 Volt electric motors according to the shelter dimensions. The scraper feed rate is 2.8-3 meters / minute. Power consumption is very low compared to its peers.
