High Foam Fat and Dirt Removing Agent
Properties
It is a foamy product used to remove heavy oil and dirt.
The amount of foam oil and dirt that you have created is shortened.
It gives superior results in cleaning all types of oil and fats in food production areas.
It's an alkaline product.
It should be rinsed after cleaning.
Areas of Use
The product is used at hotels, hospitals, restaurants, factory cafeterias and kitchen surfaces, beef and chicken slaughterhouses, daily cleaning of intense grease and organic stains at other food production facilities.
Method and Amount of Use
Cleaning with foam is realized through soaking, wiping and spraying. After cleaning, rinsing is necessary. For a more effective rinse the water needs to be between (20-70)ºC The product needs to be sprayed to the surface with a 1-5% proportion with pressurized sprayers and let on the surface for 5 minutes. It is then rinsed with pressurized water.
It needs to be 2% when the classical method is used.
Product Composition
5-15% Anionic active ingredient, Caustic (Sodium hydroxide)
< 5% Grease dissolving and complex producing ingredients
Product Specification
pH (in the %10 water) : 13±1
Density (g/ml) : 1,1±0,05
Storing Conditions
The product needs to be stored above 5ºC below 30ºC.
Packaging Type
1unit X 20L PE drum (24 box within quantity eur palette(80x120))
Attention of the Consumer
Make sure that you read the instructions.
Use rubber gloves and glasses when you are going to directly touch the product.
Do not use the product to clean your hands, face, body and food items.
In case of an accident (e.g. when you accidentally swallow the product), go to a doctor and show them the tag on the product.
Since contact with eyes and skin is going to lead to serious burns make sure you wash them with plenty of water.
The product causes slight dulling on aluminum surfaces.
Keep the box covered at all times.
Keep away from children.
