BILIZO MACRO PRIMER
Multi-Functional Epoxy Primer For Wet And Humid Surfaces
Product Description
It is an epoxy resin-based, two-component, solvent-free, transparent sealer of low viscosity.
Uses
- As primer layer for polyurethane materials in wet weather conditions;
- As primer layer before polyurea application;
- As primer layer before application of epoxy or polyurethane top-coats on the concrete, cement or epoxy mortars for floors subject to medium to heavy load;
- As concrete primer to wet the concrete surface and provide a good adhesion bridge before top-coats of epoxy mortar, epoxy self-leveling screed, epoxy laminate or epoxy/polyurethane;
- As binder for preparation of level stabilization, repair and improvement mortar;
- As binder for preparation of epoxy mortar to obtain a thickness of 5 – 8 mm;
- For repair of big cracks and form of chamfering by mixing with silica sand or different fills;
- As primer layer before polyurethane foam application.
Consumption
- As impregnation primer: 0,2 – 0,4 kg/m2
(Depending on the concrete surface, it is recommended to thin it with cellulosic thinner by 5-10 % for better impregnation).
- Level stabilization mortar:
BILIZO® MACRO PRIMER: 500 g/m2
0,1 - 0,3 mm quartz 500 g/m2
- 6-7 mm epoxy mortar :
BILIZO® MACRO PRIMER: 1,5 kg/m2
0,1 - 0,6 mm quartz 4,8 kg/m2
0,6 - 2,0 mm quartz 7,2 kg /m2
Clean Up: Cellulosic thinner.
Advantages
- Low viscosity and resilient structure.
- High wetting capability.
Applicable on damp concrete (wet concrete), cured even in contact with water after application
BILIZO® MACRO PRIMER A+B is supplied in 10+4 kg and 3+1,2 kg pails.